Material grade GG10 is the lowest grade in standard DIN 1691.

Common application for DIN 1691 GG10 grey cast iron for your reference.

For small loads, the friction and wear no special requirements for important casting, such as protective cover, cover, oil pan, hand wheels, frame, floor, hammer, small handle, counter weights etc.

Physical Properties of DIN 1691 GG10 Gray Cast Iron
Density ρ 6.8 - 7.8 g/cm³ at 20 °C Typical for Cast Iron

Mechanical Properties of DIN 1691 GG10 Gray Cast Iron
Shear modulus G 41 GPa at 20 °C Typical for Cast Iron
Tensile strength Rm 100 MPa at 20 °C

Relate Material Grade

This article is from our Dandong Foundry's DIN 1691 Grade GG10 Gray Cast Iron

HOME PAGE | CASTING BLOG | CONTACT US