Product Name:
Cast Iron Exhaust Pipe, Vent Pipe for Generator, Ductile Iron
Tailpipe, Car Manifold made in China
Description on:
Exhaust manifold, is connected with the engine cylinder body,
concentrating the exhaust gas of each cylinder to import the
main exhaust manifold, with different pipeline. The main
requirements for it are, as far as possible to reduce the
exhaust resistance, and avoid mutual interference between the
cylinders. When the exhaust concentrated excessively, the
cylinder will generate mutual interference.
That is, when a cylinder exhausts, just meets the other cylinder
to run into the exhaust gas.
Thus, it will increase the resistance of the exhaust to reduce
the engine output power. The solution is to make each cylinder
exhaust to be separated as far as possible. Each cylinder a
branch, or a branch of the two cylinder, and make each branch as
long as possible and independent molding to reduce the gas in
different tubes.
Material Grades:
Cast Iron, Gray Cast Iron, Ductile Cast Iron, S.G. Iron, Grey
Iron
Gray Cast Iron
ISO185 100 150 200 250 300
ASTMA48 NO.20 NO.25 NO.30 NO.35 NO.40 NO.45
DIN1691 GG10 GG15 GG20 GG25 GG30
EN1561 EN-GJL-100 EN-GJL-150 EN-GJL-200 EN-GJL-250 EN-GJL-300
BS1452 100 150 200 250 300
AS1830 T150 T220 T260 T300
Ductile Cast Iron
ISO1083 400-15 400-18 450-10 500-7 600-3 700-2
ASTMA536 60-40-18 60-42-10 65-45-12 70-50-05 80-55-06 80-60-03
100-70-03
DIN1693 GGG40 GGG50 GGG60 GGG70
EN1563 EN-GJS-400-15 EN-GJS-400-18 EN-GJS-450-10 EN-GJS-500-7
EN-GJS-600-3 EN-GJS-700-2
BS2789 400/17 420/12 500/7 600/7 700/2
AS1831 300-17 400-12 500-7 600-3 700-2
Production Process:
Sand Casting, Automatic Molding, Machine Molding, Shell Molding,
Green Sand Casting, Resin Sand Casting,
Supplier:
Cast Iron Foundry in China, Iron Casting Manufacturer, Iron
Foundry, China Foundry
Product Photos:
 |