The cast iron stove venturi and the cast iron burner head are the accessories of gas stove burners.
In order to guarantee the successful assembly, our quality inspector will check whether the stove venturi is vertical to the burner head, and the stove venturi shall not be inclined after installation.
There must be no cold shut, sand hole, air hole, depression, crack or other defects on the surface of the cast iron stove venturi and burner head. If there is sand sticking on the surface of the stove venturi and burner head, our Dandong Foundry will grind them, and shot blast them again.
Cast Iron Stove Burner Quality Inspection
This article is from our Dandong Foundry's Cast Iron Gas Stove Venturi and Burner Head
HOME PAGE | CASTING BLOG | CONTACT US |