About Us | Metal Casting | Casting Workshop | Machining Workshop | Quality Inspection | Contact Us  
   

Cast Iron Wheel for Feeding Machinery

 

Our foundry have produced many cast iron wheels for feeding machinery.

The high quality is necessary. If the cast iron corner unit wheel has the defect of cold shut or insufficient pouring, it is a waste product.

The wall thickness around the center hole of the cast iron corner unit wheel should be uniform. No shrinkage porosity, gas hole or other casting defects are allowed in the machining hole of the cast iron corner unit wheel.

Before delivery, the inspectors of our foundry will check whether there are defects inside the machining hole of the cast iron corner unit wheels.

shrinkage defect of the cast iron corner unit wheel

 

This article is from our Dandong Foundry's Cast Iron Wheel for Feeding Machinery

 

HOME PAGE | CASTING BLOG | CONTACT US

 

Liaoning Borui Machinery Co., Ltd. All rights reserved.
Add: No.1-4-6, Jianshe Road, Qianyang, Donggang City, Dandong, Liaoning, China 
                  Cast Iron Foundry | Sitemap