Casting Product:
Cast Iron Casing Centralizer, Casing Stabbing Board, Iron Casting for Centralizer, Customized Sand Casting Parts

Application Information:
Casing Centralizer is a device used to place the casing at the center of the hole so as to improve the efficiency of the cementing. It is an important device because if the Casing Centralizer touches the formation at any part of the hole, then cement slurry does not pass through the area of the contact resulting in a poor cementing job.

Material Grades:
Gray Cast Iron, Grey Iron, Cast Iron
EURO EN1561 EN-GJL-100, EN-GJL-150, EN-GJL-200, EN-GJL-250, EN-GJL-300
UK BS1452 100, 150, 180, 200, 220, 250, 260. 300
AUSTRALIA AS1830 T150, T180, T200, T220, T250, T260, T300
CHINA GB HT100, HT150, HT200, HT250, HT300

Ductile Cast Iron, S.G. Iron, Ductile Iron, Nodular Cast Iron, Spheroidal Graphite Cast Iron
EURO EN1563 EN-GJS-400-15, EN-GJS-400-18, EN-GJS-450-10, EN-GJS-500-7, EN-GJS-600-3, EN-GJS-700-2
UK BS2789 400/17, 420/12, 500/7, 600/3, 700/2
AUSTRALIA AS1831 370-17, 400-12, 500-7, 600-3, 700-2
CHINA GB QT400-18, QT450-10, QT500-7, QT600-3, QT700-2

Casting Production Equipment:
Shell Molding, Green Sand Casting, Resin Sand Casting

Casting Supplier:
Iron Casting Manufacturer, China Foundry, Chinese Foundry

Foundry Introduction:
Dandong Foundry is a professional Metal Foundry in Dandong City of China, with over 50 years experience in producing Iron Castings, Steel Castings and Machining Works. Our annual production output is 8000 tons of metal castings, and 70% have been exported to USA, UK, Australia, Germany and Italy etc.

HOME PAGE | CASTING BLOG | CONTACT US