Product Name:
Ductile Iron Casting, Nodular Cast Iron Crankshaft, Single
Cylinder Crankshaft, Multi-Cylinder Bolt Shaft, Iron Foundry in
China
Application on:
A crankshaft—related to crank—is a mechanical part able to
perform a conversion between reciprocating motion and rotational
motion. In a reciprocating engine, it translates reciprocating
motion of the piston into rotational motion; whereas in a
reciprocating compressor, it converts the rotational motion into
reciprocating motion. In order to do the conversion between two
motions, the crankshaft has "crank throws" or "crankpins",
additional bearing surfaces whose axis is offset from that of
the crank, to which the "big ends" of the connecting rods from
each cylinder attach.
It is typically connected to a flywheel to reduce the pulsation
characteristic of the four-stroke cycle, and sometimes a
torsional or vibrational damper at the opposite end, to reduce
the torsional vibrations often caused along the length of the
crankshaft by the cylinders farthest from the output end acting
on the torsional elasticity of the metal.
Material Grades:
Ductile Cast Iron, Nodular Cast Iron, Spheroidal Graphite Iron,
Spherulitic Graphite Cast Iron, SG Iron
ISO1083 400-15 400-18 450-10 500-7 600-3 700-2
ASTMA536 60-40-18 60-42-10 65-45-12 70-50-05 80-55-06 80-60-03
100-70-03
DIN1693 GGG40 GGG50 GGG60 GGG70
EN1563 EN-GJS-400-15 EN-GJS-400-18 EN-GJS-450-10 EN-GJS-500-7
EN-GJS-600-3 EN-GJS-700-2
BS2789 400/17 420/12 500/7 600/7 700/2
AS1831 300-17 400-12 500-7 600-3 700-2
Production Process:
Sand Casting, Automatic Molding, Machine Molding, Shell Molding,
Green Sand Casting, Resin Sand Casting,
Supplier:
Ductile Iron Foundry in China, S.G. Iron Casting Manufacturer,
Iron Foundry, China Foundry
Product Photos:

|