Product Name:
Cast Iron Machinery Parts, Hydraulic Cylinder Accessories,
Cylinder Casting made in China, Ductile Iron Manufacturer in
China

Application on:
A hydraulic cylinder produces linear motion and force by using
pressurized hydraulic fluid. Industrial machines powered by
these cylinders are able to form metals or other materials at a
very high force with a relatively small supply of highly
pressurized fluid.
Heavy equipment, such as an excavator, relies on the power of
hydraulic fluid. The operator easily controls the pressurized
hydraulic fluid with the use of a control valve connected to
distributor hoses and tubes. A solenoid valve is the type of
valve most commonly used with a hydraulic cylinder as it has a
reputation of safety and reliability. Valves not only control
the release of fluid in the cylinder, but often mix gases and
fluids as well.
A hydraulic cylinder in a car does not connect to a valve as a
means of control, but relies on piston-driven hydraulics
instead. When the brake pedal is depressed, the pedal pushes on
the piston in the master hydraulic cylinder and the slave
pistons located at each wheel work together to stop the car.
Hydraulic seals are crucial in relation to the safe functioning
of a hydraulic cylinder. Industries that use heavy equipment,
such as automotive, aerospace, government, oil, and gas rely on
improving hydraulic seal technology. The explosion of the
Challenger space shuttle in 1986 was mainly attributed to
malfunctioning hydraulic seals caused by low temperatures that
solidified the seal's inner material, thus preventing a proper
seal.
Worn out hydraulic seals also present safety concerns, but can
often be prevented by using a hydraulic cylinder with a smooth
inside surface. The outside surface of the cylinder is usually
constructed from aluminum, steel, cast iron, or bronze. Cylinder
covers hold the piston rod and can be square, round, or
custom-designed to fit each specific cylinder.
The simplest hydraulic systems consist of two pistons and a
fluid-filled pipe. Pistons used in hydraulic systems are made in
one, two, or three pieces depending on the speed and force
required by the machine. One piece of heavy construction
machinery uses up to eight hydraulic cylinders that may need as
much as 100 gallons of oil.
Water hydraulic systems use water as the fluid for the hydraulic
cylinder rather than oil. Although water is less expensive than
oil, as well as non-polluting, water's low viscosity and poor
lubrication qualities require a system designed exclusively for
water hydraulics.
Material Grades:
Cast Iron, Gray Cast Iron, Ductile Cast Iron, S.G. Iron, Grey
Iron
Gray Cast Iron
ISO185 100 150 200 250 300
ASTM A48 NO.20 NO.25 NO.30 NO.35 NO.40 NO.45
DIN1691 GG10 GG15 GG20 GG25 GG30
EN1561 EN-GJL-100 EN-GJL-150 EN-GJL-200 EN-GJL-250 EN-GJL-300
BS1452 100 150 200 250 300
AS1830 T150 T220 T260 T300
Ductile Cast Iron
ISO1083 400-15 400-18 450-10 500-7 600-3 700-2
ASTM A536 60-40-18 60-42-10 65-45-12 70-50-05 80-55-06 80-60-03
100-70-03
DIN1693 GGG40 GGG50 GGG60 GGG70
EN1563 EN-GJS-400-15 EN-GJS-400-18 EN-GJS-450-10 EN-GJS-500-7
EN-GJS-600-3 EN-GJS-700-2
BS2789 400/17 420/12 500/7 600/7 700/2
AS1831 300-17 400-12 500-7 600-3 700-2
Production Process:
Sand Casting, Automatic Molding, Machine Molding, Shell Molding,
Green Sand Casting, Resin Sand Casting,
Supplier:
Cast Iron Foundry in China, Iron Casting Manufacturer, Iron
Foundry, China Foundry
Dandong Foundry is a professional China Foundry with over 50
years experience in producing Iron Castings, Steel Castings and
Machining Works. Our main production materials are gray cast
iron, ductile cast iron, carbon steel and alloy steel.
We are ISO 9001 Quality Certified. Annual output 8000 tons of
metal castings, and 70% have been exported to USA, UK,
Australia, Germany and Italy etc.
|