Transfer Case for Truck made by Gray Cast Iron GG25

Transfer case is a type of specialized component that has been used on four-wheel drive and all-wheel drive vehicles.

It is essential on vehicles that use both front and rear axles to drive. And in the case of 4x4s, each of the four wheels need to be powered.

Transfer Case Units include:

Bearings
Flanges
Gaskets
Input Gears
Input Shafts
Seals
Shift Motors
Synchro Rings
Transfer Case Assemblies – New, Reman, Custom Repair
Transfer Case Halves
Transfer Case Rebuild Kits

How Does a Transfer Case Work?

The transfer case transfers power from the transmission to the front and rear axles by means of drive shafts. It also synchronizes the difference between the rotation of the front and rear wheels and may contain one or more sets of low range gears for off-road use. Transfer cases give you the power of all-wheel drive, so you can take your trucks where the work is. Whatever the terrain; across sand, mud, ice, or snow, you will have maximum power in all transmission speeds and in just about any off-highway application.

The following picture is a transfer case of trucks produced by grey iron GG25.

This article is from our Dandong Foundry's Transfer Case for Truck made by Gray Cast Iron GG25

HOME PAGE | CASTING BLOG | CONTACT US